Natural & Homeopathic Remedies

How to Buy a Detox Foot Bath

Ask the right questions.

• How high does the Amperage go to? (what is this? refer to Key Concepts for more info) Answer: ideally at least 3.0 Amps
• What is the Wattage? (what is this? refer to Key Concepts for more info) Answer: ideally 150 watts
• Can you control the amperage by the current or is it only controlled by adding salt to the ioncleanse foot bath water? (what is this? refer to Key Concepts for more info) Answer: amperage should be controlled by the user by adjusting the current not just by adding salt (cheap version of amperage control). if controlled only by salt then the user has to continuously add salt since the salt breaks down during the ionspa foot bath and there is no way to lower the amperage since you can not take the salt out of the water unless you add more water to the bath to dilute it.
• What is the frequency/Hertz the power unit is running at? (what is this? refer to the source Key Concepts for more info) Answer: a frequency that is healthy to the body, do not want 60 Hz
• Is the power unit running at single polarity or dual? (what is this? refer to the source listed below for Key Concepts for more info) Answer: Single, (dual is a marketing gimmick. the direction of the current can only go in 1 direction from negative to positive. You can not switch and go from positive to negative as AMD Ioncleanse states.. more info refer below to Key Concepts)
• What protection mechanisms does the power unit offer? (what is this? refer to Key Concepts for more info)
• Is the power unit built in to the ion spa foot bath tub or is it separate? Answer: preferably separate so you can use in any type of tub .. even a bath tub
• Is the detox foot bath tub made of plastic or a conductive material? (what is this? refer to Key Concepts for more info) Answer: conductive material such as copper, plastic has no conductive components
• If the water module is using a copper plate, is it 100% pure copper or does it have beryllium in it? (what is this? refer to Key Concepts for more info) Answer: 100% pure copper, beryllium is a carcinogen
• Is the water module disposable, or do you have to replace the plates manually? how many baths do you get out of the water module? (what is this? refer to the source listed below for Key Concepts for more info)
• Is the water module built in to the footbath tub or is it separate? Answer: separate so you can use in any type of tub .. even a bath tub
• How is the water module cleaned and how do they disinfect it? Answer: you want to have access to the plates to remove the mineral and toxin build up.. hospital grade disinfectant is necessary.
• Does the unit require a wristband connection to the body in order for the ion spa foot bath to run? (what is this? refer to the source listed below for Key Concepts for more info) Answer: do not want wristband. The machine is not safe and is not grounded. The wristband is to ground the person.
• What type of salt is recommended?: high quality with trace minerals or processed salt? (what is this? refer to the source listed below for Key Concepts for more info) Answer: a higher quality salt

TIPS:

• COPPER Tub vs. PLASTIC Tub: Get the copper tub since the copper acts as an additional conductor thereby making the treatment all that more powerful. Also you will get more life out of the water module due to the conductivity of the copper there by less current is ran from the unit to achieve the same AMPs. Copper also resonates a certain healing frequency. People wear copper on their body for healing. Plastic has no conductivity.
• Choose a higher quality SALT .. Such as the Himalayan Crystal Salt because of its balanced crystalline structure, which can be easily metabolized by the body. Regular Table Salt is processed & has lost its natural crystalline structure. With EPSON Salt there is less heavy metal in the brine when using epson salts vs the Himalayan salts.
• Get a unit that you can control the CURRENT and where the AMPS can at least go to 3.00 Amps. Most of the units out in the market operate only as high as 1.4 to 2.5 AMPS. A good unit is the OPTIMUM Focus detox footbath since you can control the current and the Amps go as high as 5.5. The higher the Amps then the higher the volume of electrons moving thru the water bombarding the H20 water molecules there by more ions are being produced.

Warnings:

DO NOT USE A DETOX FOOT SPA WITH A WRIST BAND!! WHY?

• A wristband is simply used to ground the body since the unit is so cheaply made the unit itself is not grounded. This is a marketing gimmick when the say it is ‘to complete the circuitry’ or ‘stimulate the upper body’.
• The wrist bands are designed to prevent the destruction of CMOS devices. (CMOS is the deposition of doping and etching of a Metal Oxide on Saphire device, in short an Integrated Circuit). Most units on the market use TR (Transformer Rectifier) concepts in producing their output, this concept does not utilize CMOS substrate devices. We often build static as we walk and move, this is more pronounced if we are wearing anything nylon. The wrist band is conductive and conducts the static electricity from the body to ground. This prevents the charge from going through the CMOS device. If a charge goes through a CMOS integrated circuit, it can destroy it instantly, most often it damages it which causes a diminishing deterioration until the ultimate failure. During the “slow death” of the device performance becomes unreliable, unrepeatable then ultimately the device fails.
• The ground strap is a marketing gimmick. Think about it, your computers and cell phones have large scale integration in their operating systems and you do not wear a ground strap when working with either of them. Why would you need grounding for something as simplistic as the power supplies in a footbath? The control circuitry may have some active devices that can be damages as we do, but with proper configuration this can be protected
• The wristband has nothing to do with the detox foot bath process. The key to the ionic detox footbath is the ions from the salt & water that are interacting with your body, not the current or so called ‘circuitry’ that these companies claim. You DO NOT want to USE WRISTBANDS since a good unit should have a chassis ground for all internal assemblies to stop any voltage potential ever being on the case.

Sources and Citations

• DC Current (click here for source)

• TO LEARN more about KEY CONCEPTS OF Detox Foot Baths (http://www.hymbas.com/detoxfootbath/FocusFootbath_FAQWhyUs.html)
• An excellent SOURCE for Detox Spa Foot bath BUYERS GUIDE, TIPS, Testimonials, Questions or even Post a Question.. Refer tohttp://www.hymbas.com/blog

About the Author

Owner of Hymbas.com (in business for over 10 years). We review a number of health equipment products that we carefully research, test and of superior quality. The products are #1 in their category and rate high in customer satisfaction, quality, and stand out from the rest of the manufacturers.